frame

I am new to this 2017 A213HW. I got it home , made it level an pushed the switch for the linear activator to lift the roof. It did but over the sink side there is a gap at the top. It's like it did not drop in the groove like the door side did. I can see light although it does not leak rain, it...

Hi, does anyone know if the Platinum edition wildwoods have an aluminum frame? I know nearly every time, fiberglass walls have aluminum frames, but this one doesn’t add up to me for the following reasons: 1. The platinum option lists fiberglass walls but makes no mention of the frame 2. The...

Pretty much all season my fridge has had sporadic problems running on propane. For awhile the flame would stay on full-bore after ignition, and over a period of hours or days it would fade to almost nothing even with the flow control knob turned up all the way. The only way I would know the...

Hello, I have a 2019 Rockwood Premier 2716G PUP that I am considering installing a WDH with. The manual states that WDH can only be installed on Box Tube A-Frames (not C-channel). I cannot find any information on what type of frame the 2019 2716G has. Does anyone know where to find this...

One of the few complaints I have about A-Frames in general is the difficulty in getting them cooled down initially. When I arrived at our site yesterday it was 91°F. When I opened the door to get the required cold beverage for setup out of the refer it was 110° inside. I've made the forward...

I have one of the original Rockwood A122’s from the very first production run. it’s given us a lot of enjoyment and we’ve made some mods along the years that have improved our comfort. One thing i’ve never liked is the original CD radio that came with the unit. i like that it’s got an ABC...

Any recommended maintence intervals for tightening frame, stairs and axle nuts? Ive not seen anything on this and maybe I'm missing it. Theres definitely no torque specs out there, maybe from Lippert for the axles?

So I am not sure exactly what my exact part is but hopefully the pics help. My issue is frame molding around the slide has become loose due to screws being stripped. the issue is the only way to get to the screws is to use a small 90-degree Phillips and access the screws between the slide wall...

I noticed on an earlier post questionable frame weld quality. Well I looked under my 2017 Rockwood Signature 8328BS and noticed no less than 12 of these within the first 5’ of my trailer;[ATTACH]209649

Water enters interior beneath the large bubble window frame and drips on bed. Point of exterior entry unknown. Have caulked with self leveling lap seal around window. Still leaks. What other possible entry points to consider and remedy. Water drips pretty heavy ..as much as a quart In a 24 hour...

I have a frameless window that trickles a bit when it rains real hard. The water will build up around the inside frame. It hasn't built up enough to leak inside the rv yet but I don't want to wait till it does. Has anyone had this problem? Any idea on how to fix this issue? I don't see any light...

Just wondering if anybody has noticed how long it takes for A frame jacks to move up or down. Or maybe it's just the type i have that has small gear teeth. Do they make different size gearing for them. As a comparison my fold down boat trailer jack is so my faster and with a lot less cranking.

I have to give a HUGE thumbs up to both Holiday RV in Steinbach, Manitoba and Rockwood. My Mini Lite 1905 developed a crack in the frame. Holiday RV was quick to communicate with Rockwood. Rockwood requested a few pictures and within a week and a half, my trailer was on it's way to Indiana for...

I have a prime time Camper and they welding on the frame looks like the welding was not done very good had the camper for 7 years is this a manufacturer issue.

I am not going to be at the camper for the next few weeks but am thinking of a project, so does anyone know how wide the opening of the door is? Thanks!

I live just outside Memphis in Hickory Withe and are looking to purchase a hard side A Frame Forrest River Camper. The closest dealer that has anything to see is 4+ hours away and the closest with a 2020 is 6 hours. We want to purchase one badly but have never stepped foot inside one. Is...

I want another way to store a sewer hose and the best spot is where these are welded. Can I cut those off and put 5x5 vinyl post cover with sewer hose where they are?. I have a 179dbk. !

Our new 2018 T12RBST, when dropped down concerns me. The left AFrame wall when it comes down has one rubber at the very tip top that rests on the microwave cabinet. The rest of this wall, laying horizontal, has no other support, and to make matters more disconcerning, the right AFrame wall...

Does anyone know where I might be able to find a source/price for the large (68 x 24) skylight on the back of the AFrames (Ours is the T12RST, 2018 model) I have given up on regular searches - cant find anything close to this size. Our skylight has a recess in the top middle of the bubble...

This is on a Coachmen Apex trailer with frameless windows. More specifically, this frameless window has a fixed pane above, and two panes beneath that open (which seems to greatly complicate my problem). Someone tried forcing the window open further from the outside, thinking they opened more...

Anyone know what the four silver brackets are for on the back roof wall of our AFrame? They are mounted around the fume sensor. Also, have two switches on side of microwave as you come in door on left side. First one works nite light right there.......what is the second one supposed to operate?

Just bought our new A-frame camper and finished our first trip. We definitely appreciate all of the information on this forum. Definitely should have read more of the FAQ's! Cheers.

Hi, I have a single axle 2018 Wolf Pup 16bhs, and I'm unsure if the battery area is strong enough for the additional weight. I went from one 12 volt to two-6 volt golf cart batteries - approximately 80 additional pounds including the battery box. There's two angle irons welded underneath on...

I've completed moding a PahaQue R-Pod Awning ( https://pahaquecustom.com/store/index.php?main_page=product_info&cPath=2&products_id=29 ) to attach to my A213HW. There really isn't much moding to do other than bend and attach the Keder Rails (2)...

Hi, I'll be diving into the rv world and have settled on the 233S as the right camper for the family. I want to order an Andersen WDH for it before I pick up the trailer, and I've searched the site and can't seem to find either the appropriate Andersen hitch nor the frame wall height to get the...