Renegade Lights

[samcrimm]

I have these two lights that don't work, or I don't know where the switch is for them if there is one. So I replace the bulb on one of these and nothing happened. So I tried the other one and nothing. Before I get the meter out and test them WHAT am I missing? I have had all the lights on nothing. All the lights off nothing. So? Can't believe both of them have quit. I on/off switch is on the wall plate.

Thanks for any help

Sam

 

[MnTom-FRF]

Time to get a meter or test light out and start tracing wires.

 

[samcrimm]

Sounds like it me too Mntom.... this place is quiet...
Sam

 

[MnTom-FRF]

Yea, that it is. BUT you will get quality assistance here!

 

[Bob86ZZ4]

Not unusual for a switch to fail. I'd try to figure out what switch does nothing. Pull it out and test it with a volt meter or test light.

 

[samcrimm]

Your right bob but what made me wonder about something else could be the problem was both lights were not working.

 

[Bottomland4x4]

Have you tried the switch on the light? Couldn't tell from your post, but the one in my toter has the switch on top. I put an led bulb in mine and it was a little finicky to get it working.

 

[samcrimm]

I found a wall switch...duh. made all the difference.

Thanks for all the input

Sam

Have you tried the switch on the light? Couldn't tell from your post, but the one in my toter has the switch on top. I put an led bulb in mine and it was a little finicky to get it working.

 

[bushpilot-TC]

I found a wall switch...duh. made all the difference.

Thanks for all the input

Sam

HA ! I'm laughing with you....ive got a dash switch that I've STILL never figured out what it does.