mount

Hi Everyone, We have a 2021 Grey Wolf 26' it has a ceiling mount sticker in the master and my stud finder shows a 8" square to mount in. My problem is I don't know what material the mount is made out of ( it's not metal because magnets don't stick) so I am assuming it's wood. But more...

Hi all, Thanks in advance for your patience if this has been asked but I'm not seeing a lot in the search. New to toy haulers and I have a Salem FSX 190RT we're outfitting for our first trip. TV mount question. The back wall has a tv sticker and I am supposing the backer is directly behind that...

Hi all. I own a 2005 Flagstaff 206ST. It’s got straps mounted to the interior ceiling that hold the full size door up during travel. The straps are coming loose because the screws seem to be too short. I think they are only through the aluminum paneling, not actually secured into the wood of...

I fabricated this mount to hang a 32" TV. It's made from aluminum stock that's bolted together. The top bar is angle stock that slides behind the wall lock lever and secures everything in place. A piece of "C" channel extends down and a TV mount that I bought on Amazon is attached towards the...

I have a 2022 Precept 36C motorhome with a fiberglass roof that I’m going to be installing solar panels onto it. I contacted Jayco and they said the roof was 3/4” plywood. I’m going to be building a rack out of 2” x 1/8” thick angle aluminum. Here’s what the rack idea will mimic: I’ll be...

Walking around an RV show at a local outlet mall yesterday. Just looking at prices, and whatnot. Not in the market to buy anything, but we're always curious how all the brands do things. Ran across a small, single axle trailer, I forget the brand, but it was a serious unit for going offroad...

Has anybody mounted a TV in their Rpod 202 Bedroom? They come with one pre-installed in the living area and there is a space to mount one in the bedroom. Supposedly there is backing behind the wall but the only backing I could see is one 2x4 mounted horizontally approximately in the middle of...

We are new owners of a 2022 XL40e . Has anyone added a articulating tv mount to exterior tv ? .. brands , pics , advise welcomed .. thx Boogie

We had our first flat last Sunday on one of our 6 year old Ridgeway Sport tires. It wasn't a blowout fortunately so no shredding nor damage to the trailer. DW heard a hissing on her side just before I started feeling the steering shimmy a little. We were on I-40 about 15 miles from home...

I have a King Tailgater dish mounted to roof of my Rv, and would like to remove it, to make it move able. But I'm not sure if that's possible without messing up my roof. Has anyone ever encountered this and how do I know if I can remove it?

I want to install a latch to hold the door open. The designed gas strut is useless as it disconnects with a wind gust. I also want to install the same latch for the main pass thur storage door. My questions/concerns are: *what length screw can I use without going too deep? *The attached...

I have a 2015 Georgetown XL 378TS. I want to replace the TV and can’t seem to figure out how to get it off mount. Anybody know how? Thanks KennyD

I would like to mount a removable outside tv bracket, probably a 32” tv so not extremely heavy, Under the canopy maybe above the hot water heater vent ? - advice please, what do I seal it with ? Certainly don’t want it to pull the side panel - thanks in advance

Hi, I am wondering if anyone mounts their grill with a bumper grill mount to the trailer frame upfront? Mounting the grill with a rail under the awning is not recommended due to the smoke and heat. The door will hit the grill when opened if putting a mounting rail above the front storage...

Does anyone know the part # for the Forest River rail mounted table I am Interested in getting another if the price isn't crazy :eek: Camco makes one and Amazon has it for $32.00 but I'd prefer the FR table but I'm sure it's probably more $$$

New to RVing, we bought a used 2019 Forest River Sonoma 167RB. Read the threads about backup cameras, which were very helpful, so I bought an Antifo to put on the pre-wired Furrion mount. But I can't seem to have any power to the Furrion plug (and yes, the battery is on). Any ideas would be...

Although I liked the convenience of the RVQ on the swing arm of the back bumper, I was not a big fan of the grill since its a rust bucket and does not cook very well. We have a Weber Q200 which I prefer but I was tired of getting it out of our pass through storage and getting it set up. Did this...

I've seen several posts on this but no definitive answer. I have a 2015 360 RB. Has anyone found a way of mounting a full motion swivel mount in the outside TV bay? The TV is just not in a convenient location for me. I've found several expensive mounts made by Crimson which seem to be the...

I have a pair of 60lb, 36" struts on order. My question is where do I mount them? One school of thought is to mount the top 24.5" from the rear of the roof and 10" down from the lip. Another owner installed his 24" from the rear and 17" down from the lip. Can someone help me understand the...

Registration for this event will open on Wednesday, June 8, at noon EST. For complete information, or to register, go to 2022 Smoky Mountain Magic.

Just got a 2021 Salem 32RET and want to install a PAW tv mount on exterior are that is marked "TV BACKER". Does anyone know the dimensions of the backer? I'd like an idea before I start drilling holes in my rig. Thanks for any advise!

I have a shower wall made of DUO FORM plastic and want to mount shower head holder and wanted to know what you all thought was the best way? I tried double sided tape (not the best type) and it did not hold. Would any sheet metal screw with silicone to keep it from leaking work?

Hello First time trailer owner! We have a 2022 31kqbts and we are wondering can a tv be mounted directly to the living room wall above the fireplace or should we buy something to reinforce the wall? Does anyone know the weight rating of the wall or the shelving unit underneath? Thanks!

I have the Cross Flex TPO roof. I mounted my solar panel using the Renegy Z Brackets and used 1/4" galvanized lag bolts to bolt them to my roof. I then covered that with Dicor to seal it and make sure the bolts do not back out. BUT, I feel like the bolts don't have much "bite" and could pull...