mount

I've seen posts regarding mounting a StarLink gen 2 to a Grand Design ladder but wanted to find the best ladder mounting system for the StarLink gen 3 to a 2023 Grand Design Imagine 2910BH. I'm not as concerned about price as I am fit, stability, durability, etc. Any thoughts? Thank you! Ron

Hi all, apologies if this isn't the right place to post but wasn't sure where else this thread might go.. please let me know if it should go somewhere else. I've repurposed a used marine ladder off of Marketplace as an exterior ladder for my 201BHXL, however it only came with two sets of...

Hello everyone, I'm about to begin my solar "adventure", nothing crazy, just a two panel 200 watt setup, roof mounted. I've not yet decided if I'm going to use the screws and brackets included with the kit, or use plastic(abs?) corner supports and lap sealant. Will I hit anything using 1 5/8...

We mounted a wall mount for our vacuum in the bedroom of our unit, just behind the bathroom wall, but my wife wants it on the side wall (approximately where the red mark on the picture is). By tapping around, it seems to be solid, but I do not know the structure behind it or if any wires run...

I have a 2020 Wildwood 24RLXL. I'd like to mount a TV to the bedroom wall. There is a cable outlet and a power outlet located on the wall to the left of the bedroom window. So because of this I'm guessing a TV can be mounted. There is no sticker indicating placement of a TV mount. I've done the...

Hi. I'm in the market for a used slide in. Went and saw one today ... the owners had removed the turnbuckle mounts from both the front and the rear on this slide in camper. Is there a feasible way to get in a repair that? When I say removed, they took a metal wheel and cut them off. Thanks!

We have a 2022 Surveyor 252RBLE. We are looking to install wall mount for tv in the bedroom Have watched a few vids to assist in install. People are using magnets to locate backing plates so I did that same but no luck with finding any magnetized area. Is it possible it’s wood and not metal...

Hello ! I have a 2023 Primetime Crusader 395BHL and I want to mount a TV in the front bedroom. Does anyone know if there is a ba king plate ? Does anyone have any other ideas ? Thanks !

After my most recent trip home we discovered our 50” Summit TV was hanging only partially mounted to the lift up door. Upon removing the TV, I found the right lower attach points was broken out of the back of the TV, and the left lower attaching hardware was missing. I have reattached the...

Anyone who has a class c with oval marker lights on top of the rear wall, check to see if they're mounted correctly. I had two go out not long after buying my 2018. I just got around to replacing them. Found on sale for $13.xx. while doing the work I noticed the two that burned out (led) were...

Trying to put a TV in my new 161 QK and the factory bracket is set too high for the TV to be slid down into it. I found a few videos that talk about a metal plate on the other side of the wall as a "backer" for TV's: (chapter 3) (chapter 2) I'd like to either lower the bracket location but...

So a few years back, down a bike week in Daytona, I would see a coach there every year, a Super C, that had a 5th wheel mounted on the rear. The guys trailer was like a bumper pull but had the kingpin on it to connect to the 5th wheel. Besides the obvious advantages of a 5th wheel I always...

I haven't been up on the ladder yet to examine it closely but has anyone had success with a particular adapter to mount a Ford camera (probably pretty generic) on the OEM Furrion camera base? I'm hoping it can be compact but suspect not.

My 21 Force has Coleman ACs with electric aux heat. They are so noisy I can't even talk on the phone when running. I've been in any number of garages, work sheds and small cottages with minisplit heat pumps that you can barely hear. I just had a Bosch inverter (variable speed) heat pump...

Goods evening all. I am looking to install an outside mount for a tv on ‘23 FR Della Terra 28 footer. Can anyone give me some insight into landmarks to look for ? Thanks

I need to replace the Lumitronics RV 12V LED Oval light on the front of my trailer. It had a gray soft foam rubber gasket as a backer that had adhesive on at least one side. Does anyone know what the foam sheets are called? Thanks in advance!

Is anyone running the Stromberg-Carlson generator mount? I really like the idea, but I’m wondering if it’ll interfere with my WDH. Does anyone have experience with one of these?

For the main TV, has anyone mounted an aftermarket swivel mount on the cabinet door face so that the TV can be viewed from the dinette? If so, can you share the brand and model? Thanks, RobinY 2023 DX3 34KD

I have a Coachman Adrenaline with a generator mount the front. Does anyone know the weight limit on it? I have tried looking at all the paperwork, and cannot find anything.

I have a Coachman Adrenaline with a generator mount the front. Does anyone know the weight limit on it? I have tried looking at all the paperwork, and cannot find anything.

How are these TVs mounted? There is no obvious access from above, below or either side. The small TV is tight in the opening and the front TV has a small gap above the sound bar. I cannot feel or see any straps or pull chords above the sound bar, but the gap is extremely small. The sound bar is...

Bought our 22 FR3, it did not have XM radio antenna installed, but the radio had the option for it. I bought the tuner, plugged it in, and looked for the antenna that the salesman told me was there.... Not there. Nothing on the paperwork, so I bought a window-mount antenna for the tuner and it...

I have a 2016 coachmen prism with the 2 step kwikee electric step. I have had several problems, so I know that kwikee was bought by Lippert. They have always been "spongy" to step on and have used brace when possible. I also know mine is a solid unit with the motor and gears inside, you have to...

I'd like to find a way to utilize the outside rear wall. Maybe mount some recovery boards or light tools with some overland kits. Anyone have experience with this? If you're familiar with Native Overland, I'm looking to do something similar to pictured. (He hung an entire mini split back there!)

I’m in need of some help to find the replacement of one my levelers mounting bracket. It is completely bent and needs to be replaced (see photos). RV: 2020 32’ Forest river Sunseeker Leveling panel: lippert 421484 I emailed lippert and they said “ You will have to get the frame bracket...