led

Hi - Can someone please shoot me a photo of their switch wiring? I stupidly forgot to take a photo before I disconnected the wires to mine. Yeah, you’d think I was smart/old enough to not make such a dumb move… Thanks - Ned

Hi all I have searched the forum and can't find anything related. I declare dumb question amnesty here :) I have a 2022 wolf pup and I keep reading to check the distilled water in the battery to make sure it's full. I can't for the life of me figure out how to do this on mine. I don't think...

I had my East to West Alta plugged in today to open slide. It is not plugged in now, but the front accent LED lights are on. Where do I find the switch to turn them off?

Can a generator be installed in a Cedar Creek 36RE that can be operated where it sits? Where would it go and how is the exhaust routed? Is there a particular model?

One of my LED lights (the ones that are just decorative) needs a little help. Was hoping to just unscrew something and find a part # that I could just replace on Amazon, but it doesn't look like something I can just easily unplug. Has anyone fixed one of these yet?

So pulled in got hooked up and everything’s fine. About 6 hours later I notice that the UBS ports up front are not working and then the lights over the bed come on and off can’t stop them, what is going on?

We were out last week and plug into our 30 amp service, and went to plug in our USB cords to charge phones, and there was no power on either side. That night we were in bed and the small lights over the bed came on and flickered it went off for a while, and it came back on again. They were not...

I wanted to auto-switch between Shore, Genset and Inverter, and after researching decided to install a 2nd Auto Transfer Switch. That was WAY easier than adding a sub panel or rewiring breakers. It works great and all we do is turn off the Converter and 2 AC circuit breakers when boondocking...

Does anyone know where the fuse for the awning light is? Thanks in advance.

Hi - My Georgetown’s led awning lights stopped working. Is there a separate fuse for them? If so, where would it be located? Thanks in advance.

Hi Everyone, this is my first post on the forum. We just purchased the NoBo 19.8 on Friday and figuring things out. We are absolutely excited and ready to start camping. We come from a lot of tent camping and now making our next logical move! One thing I noticed is the long LED strip (yellow)...

I will soon have the front nose cap of my 2018 Rockwood trailer repainted due to blistered and peeling clearcoat, and wish to remove the LED docking lights before painting. For a couple years, the adhesive has been breaking down and oozing out a bit. Has anyone removed and replaced these? The...

New barely used Sunseeker 2350LE. I've probably used the 12V outlet over the bed like 5 times total. The first 4 times I probably braced one hand against the outlet while pulling the plug out, since I expected something like this to happen. This time, I forgot, and even though the pull force...

PLEASE read the thread titled "Check your propane tank mounting bracket welding!" I posted it on the General Motorhome forum because this problem may not affect just Georgetowns but the two reported failures were both Georgetowns...

I just installed a Haloview MC7109 backup camera on my 2023 Rockwood Mini Lite 2109S. But the antenna is tilted to the side because of the Furion eyebrow mount. Has anyone got a work-around for this, or is it okay for the antenna to be tilted? Also, there is a shorter antenna included (three...

The LED on our less than 1 year old Flagstaff has stopped working. Unit itself is working but navigating in the blind with lack of LED. Unit is IRV62/63. We have tried the reset suggestion of holding power button for 5 secs to no avail. Any suggestions appreciated, realizing it’s likely under...

I have a 2010 rockwood freedom 1970 that has an L-frame bracket where the door rests while the other-side is snapped to the ceiling while driving. The screws for the bracket has pulled out. Has anyone else had this happen? And how did you fix/improve on this bracket? I am thinking of...

I own a 2021 FR3 30ds. I'm thinking of adding additional Tail-Turn-Brake LED lights to improve visibility, especially when towing an SUV. I came across these from boogielights.com: https://www.boogeylights.com/tail-turn-brake-add-on-led-light-strip Would like to know if anyone has tried...

I use a R6 with the 2509S and F150. Over 55 mph and vehicles passing cause a-lot of sway. Spec say it should work, but real life sway is horrible - any one experience an issue like this before with one of these campers?

After a few weeks of searching. Decided to notch out the left side endcap to replace the led strip in the awning instead of taking everything apart. Brought the awning down so I didn't have to work in a ladder Used a bi metal oscillating saw to notch it. Just worked it back and forth slowly then...

I have a 2016 forester 2651 motorhome with the command electronics led lights. Which the ones over the sink begin blinking about 2-3 years in. I looked at my options and finally found the same light from command electronics with a plastic cover rather than the glass one. Kept digging and found...

How in the world do you change this LED light? I don’t want to ruin it trying to get the whole housing out but it looks like that’s the only way you can do. It is to pry it out of there. It appears that once you do that it might be loose when you try to put it back in I don’t wanna ruin this...

Only 2 of the lights working on this LED ...

Our Rockwood Signature 8263MBR has a switch that turns on an external light by the entry steps, as well as one near the floor on the wall between the trailer entry and bedroom: both lights are a brilliant “daylight spectrum” blue-white LED. The internal light is very bright, and not dimmable...

Just noticed that the V shaped led docking lite on the front of our camper is sticky. I think it had a cover on the led strip but somehow its missing:banghead:. I'm wondering if it will leak now that there is no cover?