hitch

So I just purchased my 2021 freedom 2318g popup. Driving home was pretty good. Need a slightly taller ball mount to level it better. For those who use a weight distribution hitch are they worth it? Needed for a popup? Weight of mine is 2400lb dry. Just trying to see if its overkill or a...

My cousin recently bought a 310 Heritage Glen travel trailer. The original hitch pin broke so she replaced with a locking pin. After moving her trailer a short distance she noticed the new pin had bent. Need a recommendation for the best locking pin for this trailer. Thanks Battchief

Anyone using this weight distribution hitch? It looks very interesting. Any thoughts or experience? I am always looking for upgrades to my system. Here is a link for reference: https://www.weigh-safe.com/product/true-tow-weight-distribution-hitch/

Please could one of the Isata 5 owners measure the hitch box height. I am looking for the distance from ground to the bottom exterior of the socket. Loaded or unloaded - no matter but not connected to a trailer. Many thanks in advance.

Upgrading to a 5th wheel. 2019 sierra 384qbok. Installing curt hide a ball gooseneck. Looking into the anderson ultimate. I measured the bed rail height and its 21" do i need a longer tube or will the stock tube with the andersen work?

I’ve not been a fan of all the parts to get the 3” receiver to the 2” receiver for our Roadmaster tow bar while providing a mount for the E-Bikes. Worked with Gen-Y and think it’s now solved... takes two pieces out of the connections while providing 1,500 lbs tongue and 10,000 tow capacity.

2018 shamrock 233s 2014 Navigator Do I just try to install it high enough so it seems level? Or is there match for how high my hitch should be?

Hi, I'm new to all of this and hope you all can help me. I'm considering buying a Wolf Pup 16FQ with a hitch weight of 444 lbs. The max tongue weight on my 2018 Hyundai Santa Fe SE is 500 lbs. Does the trailer hitch weight include battery and propane or are one or both included? If neither...

We have a Forest River Flagstaff 32 foot fifth wheel. It came with a Reese Revolution hitch, which we liked, but always had trouble hooking up. While camping we saw the Andersen hitch that another camper had and we were sold on it. We purchased the Andersen. We purchased the B&W gooseneck...

Husky Centerline WDH Hitch 2017 F-150 Crew Long Bed (Truck is stock. Not lifted in anyway) 2011 Flagstaff 30WIFKSS (Same As Rockwood Windjammer 3008) When leveled, the coupler height is 17 1/2". The lowest I can get the ball is 20" When hooked up the trailer sits level. I am about 1 3/4"...

Well guys, if you have seen my previous posts you know i added a Buckstop bumper and 16.5 warn winch to my Dx3. Well, it paid off....had to winch tonight in the middle of a city! I entered a parking lot and didnt realize the slope would scrape the rear end....as it started scraping i slowed...

We are new HW27SC owners and excited to hit the road. We bought the unit with roof rack under the idea of putting our 4 bikes on top. However thinking through it, I was pretty resolved to buy the ProRac system instead. However, I’m wondering if anyone has used a double hitch adapter from...

We are in a pickle. We have committed to buying a 2009 escape 5.0. Very excited about it. However getting the rails for a 5th wheel hitch into my 2010 ford ranger has proven to be difficult. We had a local installer who said they had done it in the past. We waited 2 weeks for the install...

I just purchased a Hensley Arrow hitch, the main reason was I would get a little sway if the anti-sway bar was not adjusted correctly and it seemed to never be able to set in the same place twice and I am tired of pulling over on the trip to adjust trying to find the best location for setting...

Good Morning, Trying to find a definitive answer on adding a bikerack/hitch to the rear bumper. I plan on removing the spare tire to compensate for some of the weight, but I am unclear if the bumper is designed to hold this load, or if additional support weldings may be needed. Anyone have iput...

I'm confused. My trailer specs. Weight Dry Weight 4,841 lbs. Payload Capacity 1,933 lbs. Hitch Weight 614 lbs. Is the hitch weight 614 lbs when it is at dry weight or when the trailer is fully loaded?

I hope to get some input on whether my hitch needs to be adjusted. I just picked up my Escape 19 is Sumas yesterday (super exciting!). I have the E2 by FastWay installed by Escape and a 2009 Toyota Tacoma as my tow vehicle. I did not load anything into my trailer since I wanted to get a base...

i looking to find hitch height on 2019 trail blazer 29THS when level

Hi all, We just purchased a Rockwood 2896MB fifth wheel. I have a 2007 Dodge Ram 3500 dually (Cummins) that I will be using to tow it. I need to have a hitch installed. The fifth wheel has a Turning Point Pin Box. I’ve read in another place in this forum that some hitches are better for this...

Although I'm looking for advice on the Salem 179DBK, I'd welcome any advice on this. My wife and I reserved with a downpayment (none in stock) a 179DBK, but are having second thoughts because our tow vehicle is 600/6000. Starting with the 502lbs hitch weight (from the website, so not including...

Although I'm looking for advice on the Salem 179DBK, I'd welcome any advice on this. My wife and I reserved with a downpayment (none in stock) a 179DBK, but are having second thoughts because our tow vehicle is 600/6000. Starting with the 502lbs hitch weight (from the website, so not including...

I own a 2016 Sunseeker 2250SLE on an E350 chassis with the 6.8L V10. I want to tow a 2014 Toyota Sienna which weights approx 4500lbs. With the weight of the tow dolly I will definitely be pushing the 5000lbs rated tow hitch. Should I change the hitch with a higher rated hitch?

What is the hitch height for the Geo Pro G15TB? The standard and the Off Road models?

Good morning! I'm getting ready to take delivery of my new Wolf Pup 16FQ and need to figure out the right ball mount for pick up. Does anyone know the hitch height of the Wolf Pup 16FQ Trailer? Thanks so much!

Can't find it anywhere in documentation. Thanks