[DPRIVAT]

Hi guys,

I started in on redoing my motorhome this year because I didn’t like the layout and the aluminum sided box with unsealed seams that wicked water in by capillary action around every wall penetration annoyed me with all the moisture and weeping marks down the walls inside. So, I’ve opted for a 102”x102”x25’ FRP box with aluminum roof. I’ve transverse mounted a custom 150 gallon fuel tank, put the fresh water tank and sewer tank between the frame rails to save space outside the frame rails for storage, etc.. The old box also had no slide room, so I’m adding in a 12 footer x 8’ tall unit from Liftco. I’ll attempt to walk you through my process, and any helpful thoughts you may share along the way will be appreciated. Currently the box is mounted, tanks are in, slide room is getting framed in. I’ll get photos and progress reports coming right along soon.