motorcycle

I literally just purchased a trailer and got rear ended on the way home. Fender was bent from impact and upon inspection, I notice the wheel is not centered. It is slightly bent outwards. Do I need to replace the entire axle? It’s a torsion axle don’t know if I’m able to just replace the torsion...

I posted in some earlier threads about my new truck, and I am going to be picking up a 31G travel trailer to haul my motorcycles. I am planning to install the Pit Bull Trailer Restraint system in there for attaching my bikes, so I was curious if anyone on these forums has ever done an install on...

Help I want to put a bmw r100 in to my forrst river gray wolf.Is their any way to fasten the habor ft. cauk to the Dring so it cant move.Also looking at Bolt it on.any advice from someone that has tried this! Thank you all.

I currently have a Winnebago Journey Diesel Pusher with a Cruiser Lift motorcycle carrier on the rear and a custom front 2" receiver attached to the frame on the front end. I use the latter mostly for a dual bicycle rack but have also used it as a trailer hitch for parking a trailer in tight...

Hello all, I have two Harley baggers that we haul in our 20 2227 RR toy hauler. The problem is the way they have the eye hooks in the floor and make it really hard to secure the bikes. Both bikes fit between the wheel wells on wheel stands, but I need help or advice, and how to secure them in...

I have a 2015 Sunseeker 3010. I’m considering buying a KTM 390 Adventure, which weighs just under 400 lbs. I have no doubt the receiver would be able to handle a carrier and that weight. I haven’t looked into whether the Sunseeker itself could handle it. Does anyone use a carrier on the back...

We are newbies to RV'ing and Full-timing but having a blast! After nearly two years of research we finally pulled the trigger and went BIG! Grand Design Momentum 399TH pulled by an F450! We are very happy with both choices. Right now it is about traveling from town to town to visit family...

Curious as to what people are doing to secure there motorcycles? Trusting factory d rings ? I have a street glide thanks

I just picked up my new 270 and worried now that my Roadglide will high center on the transition from ramp to trailer. Anyone have any experience of this happening or pointers on option to fox if it has?

My wife and I are placing our order for a 2022 Micro Boost 25LRLE. We decided on a TH for a bunch of reasons, but one of mine was the ability for me to take my bike with on trips, and use it for track days as well. I've only ever towed bikes on trailers with front wheel chocks. My current...

My husband & I have a 2019 Spyder RT Limited. Any other Spyder ryders out there? We plan on taking it with us in our new to us toy hauler. We’re I. The St Louis area.

We just purchased a 2017 forest river nitro XLR 29kw. I want to install a condor motorcycle wheel chock inside the toy hauler. Can I get some advise on doing so from people that have done this? thank. Scott

I just purchased a 2010 automatic goldwing and wondering how to unload out of my toy hauler. I'm used to unloading my 2013 harley by simply putting in 1st gear and clutching it out using the motor as a brake.

I have 2 mounts side be side i haul 2 motorcycle can I haul just 1 one one side or should I center it

This is the bike lift we put our 2021 GT3

Does anyone on here carry a heavier motorcycle (~800 lbs) on the back of their Dynamax M2? If so, what carrier are you using and have you had any issues with it? Thanks, Jim

Read an older thread on here asking about types of trailers. I know this is a little late, but we love our Kendon single bike trailer. Used it with a pretty heavy Yamaha FJR for a while and recently switched to a Tracer 900GT (much lighter). We can 'fold' the trailer over, stand it up and roll...

I have a W&P 25WAB that I installed a Renogy 200w solar kit, a 600 watt pure sine wave inverter, and two group 24 12v Batteries. During the winter months I normally put the Harley in the trailer for storage which is in a storage lot without shore power. So my question is, what is the best way...

I just bought a 2018 e pro e19fbs. I have a small motorcycle Yamaha tw200 that I would like to bring along. It weighs 275lbs. I was hoping I could mount a hitch to the rear of the camper and haul my bike on my hauler that goes in the hitch. This camper has no rear bumper and it looks like it...

Looking into bringing along my KTM EXC-F 350 on some trips. Approximately 225# dry. Option 1: Professionally installed 2" receiver on the rear of my 2021 TS33. I realize this has weight implications, changing tongue weight, etc. Option 2: Installing a new bumper/grille guard on the...

I have posted this question just in the Lexington section and did not get a lot of response so let’s try it with everyone. Has anyone carried a 500 pound motorcycle hung off the back of their Class B coach? I am interested in type/manufacturer of carrier used and any problems or good points...

Has anyone hung a 500 pound motorcycle on the back of their Lexington? If so what brand/model rack and any comments you might have (good or bad) as to how it worked for you. Please, I am not looking for comments about trailering behind but actually hanging one from the trailer hitch.

I purchased a 2019 Forest River Georgetown GT3 motorhome and would like to mount a motorcycle carrier on the receiver hitch. My concern is the combined weight of the carrier and cycle slightly exceeding the tongue weight of the hitch that came with the RV. The hitch is rated for 5000lbs with a...

This is for those considering carrying a modest size motorcycle on their trailer hitch. I have a 30x3 and bought a little BMW for a trip to Alaska (now not happening this year) because I didn’t want to haul the Cherokee there and back and deal with towing through smaller gas stations. It weighs...

I have an 8289 5th wheel that is 1 motorcycle transport from perfect. My wife and I have not been happy with available toy hauler floor plans. The I-beams that hold the bumper look pretty beefy. Do you think a rear tray that holds a motorcycle could be welded or fastened to those? Or any other...