bed

Has anyone managed to find the wattage of the USB charger on the overhead reading lights in a Europa 31SS? That seems to be the easiest to get to USB cable that doesn't involve possibly tripping over it (like the bed mounted ones) and I'm considering figuring out how to mount a MagSafe plate on...

I initially noticed the bed was angled toward the right when sliding in. Now the bed is showing a code - 4 red and 2 green. I can move it in or out so far by repeatedly pressing the button as it moves a small amount each time. I called Lippert customer service and he said it is either the #2...

Hello! Proud new owner of my first trailer. Really excited. One thing I noticed when I was with the seller was the head of the murphy bed was bent. They said they never really noticed it but were willing to take a good chunk of change off of the selling price. Anyways, for those who have this...

2019 Rockwood 2606WS, Bedroom sliding door upper frame/bracket has separated from ceiling, leaving a gap of around 1/2 in between ceiling and bracket/frame. Contacted FR and suggested using wider screws to secure said bracket ect. back to ceiling. My question is has anyone ever had such problems...

A few months after we purchased our trailer, the Versa-Tilt bed collapsed. Found the block that attaches the bed to the extension arm pulled out so I reattached the block to the bed. About a week later the bed stopped working. It’s as if there is no power to the switch or unit. No blown fuses...

i bought this camper used. I just noticed that the slide when it comes in, is angled toward right side closer to the wall/window on the right side. so much so that it is tight against the window valance thing. I looked on the outside and it fits tight on one side and a gap on the other. any...

Does anyone with a 2021 FR3 with a sofa bed option? I need the part number or tag that is stapled onto the sofa for color and design I’m guessing. I have spoken to FR and they need that to order new seat cover or to see if it still being made. I found the tag on the dinette but they can’t use...

Has anyone upgraded the gas struts on their bed to hold a heavier mattress? Ours were fine for the the light foam mattress that came with our FE 274RKS, but won't hold up an upgraded queen mattress. Looking for what strut weight I should get. I can't find any markings on the current ones.

After our first full summer in our Europa 32KD one thing we miss from our Isata 3 was a MaxxAir in the bedroom. How difficult would it be to add one? I think there is room between the air conditioner and the rear window but I'm wondering if the roof construction would prevent it. I'm also not...

Is the Rockwood Roo 2024 60 in hide-a-bed the width? If so, what is the length from head to foot when extended? Thanks, mtbrien

Where are the hydralic cylinders for the bedroom slide located on a 2013 Georgetown 360DS motorhome and how do I get to them? The hydralic hose for my bedroom slide broke next to the pump. I need to replace the hose and don't know where the hydralic cylinder is locatd. I plan to replace all...

I've replaced the cheap original mattress for a better one, which is heavier. The current gas pistons are rated at 50lbs, but will not hold the mattress up. I'm guessing the new mattress weighs about 70lbs. Would pistons rated at 80lbs work, or is it not that simple? Cory, wrong category to...

I have an unusual bedroom slide leak when it rains or I wash the coach. With the slide in, there is a constant drip that seems to be coming out of the bottom front corner of the slide wall under the bed at the 1” angle end that runs along the slide where the wall meets the slide bottom. I have...

We have a 2022 forester 2861. Our master bed is on a slide. We replaced the original mattress with a new one. Discovered that the foot of the bed is 1 1/2 to 2 inches higher than the head of the bed. Thought it felt funny!! Has anyone else experienced this? If so what solution or modifications...

We have a new Salem Hemmisphere 25RBHL with a Vera Tilt bed. We have not used this trailer yet but noticed shaving from the screws on the bottom plastic plate wearing away the plywood bed base. Is there something missing here? I cannot see this being by design. I am going to countersink the...

I have a rubber bed mat, i was thinking about cutting some 6"x6" wedges and screwing through the mat into the wedges (covered in aluminum) Not sure what kind of angle, thinking 45 degrees to start with. What has anyone else tried

After my pulley left the chat, I saw a 24 XL with a similar sized MB Slide and it did not have any cables. Is this a newer style? Why has Dynamax gone to a different style I wonder? Can mine be modified to the newer style I wonder? Thorne Parker, CDR.,USN-Ret.

I have an '05 19. I'm trying to clean off the mildew stains the previous owner left. I'm using CLR No Bleach mildew cleaner and it does a great job on the exterior. But I'm having a problem with the interior side. Some of it came off but a lot was left. In looking closer, there is a net-like...

This slide has probably been used about 25 times since new. I always have the XL level and my Li batteries always have more than 13 volts. Bedroom Slide pulley in 22 XL 34KD has come off the mount. This happened Friday and thankfully my RV Park neighbors, six of them, were able to get the...

Hello Thinking of modifying the murphy bed on our 2021 Wolf pup 16FQ. I would like to remove the board at the front of the couch to allow plastic bins to be slid in and out from under the murphy bed / couch. does anyone know if this is structural to the couch?? Dropbox Thanks George

I have a 2017 Leprechaun 260DS. I purchased my Leprechaun (used) earlier this year and have used it numerous times. However, this past week was the first time that I tried to convert the dinette table to a bed. It was impossible to make the conversion from a table to a bed. The cushions...

Hi, New to the forum and we just bought our first RV. Please help me figure out my problem with the Bedroom slide not working when trying to use the wall button. 2005 FR Forester 2860ds My theory is the previous owner tried to slide it out with button and it blew a fuse bcuz the slide was...

I was thinking of putting several coats of spray on bedliner on the black skirting of my fifth wheel. It takes a brunt of the road rash so I thought it might protect it more. Has anyone done this or something similar? What were your impressions? I know the prep is important and will take...

Hi friends, we are brand new to the forums, but have been camping and RVing for over 30yrs. We recently purchased a new 2022 Salem FSX 169RSK camper with the slide in the bedroom. The first trip out, the end of the bed came apart at the staples. Forest River has a cubicle for 4 soft storage bags...

We purchase a new Forest River 2024 Ozark 1680BSKX. The issue we are having with the Murphy bed is Forest River decided to remove the fold-down mattress support like the one-in the 2023 model. The mattress does not lay flat when trying to get out and the mattress falls to the floor. Our first...