Search results

Hi! Yeah we have a maxxfan that is over the cooking area. And yes, the screen on it does get nasty much faster than the one in the rear. This size is big, but it's manageable. The height is the biggest issue for me. I'm just under 8' wide and 26' OAL.

Revising this..... Hagerty won't do rv. Period. Doesn't matter if it's a custom truck or not. Even if it's not registered as an rv. They won't touch it Sent from my SM-G950U using Tapatalk

We were on a weekday, so it was empty but I would say probably no problem. School busses make it in and out. Apparently if you park in the other lot there is a power pole with hookups too! Sent from my SM-G950U using Tapatalk

The best stuff! No damn leaky threads! I'm a general contractor, so I borrow from there, not so much the rv side of things. Pex rocks. Sent from my SM-G950U using Tapatalk

I got the plain with the anti slip tape. Better than expected! Sent from my SM-G950U using Tapatalk

Alex, I have the Brophy ones. They work well. If you want any measurements let me Know. Sent from my SM-G950U using Tapatalk

Sam there are other similar ones out there! Sent from my SM-G950U using Tapatalk

Here you go https://www.romcorp.com/products/truck-trailer/side-door-access/bustin-tap-200

They slide in under the trailer Sent from my SM-G950U using Tapatalk

I'll see if I can find it tomorrow.... I saves a few examples of steps I liked.... It's a commercially available one iirc Sent from my SM-G950U using Tapatalk

Ah just a step example of the Googler :D saved in my ideas folder.... Sent from my SM-G950U using Tapatalk

Nope, we tow the boat occasionally. The previous owner dragged a 26-foot enclosed trailer around though. Sent from my SM-G950U using Tapatalk

How about penetrating epoxy for the lower wood section? I put some EZ cool over my cab-box gasket, not sure it does a ton. I throw a moving blanket over the hole when we are stopped, kind of isolates the cab. I want to say I have seen an h shaped extrusion that will go over the ply and leave...

Whistler, BC Parking lot*meals

Sasquatch, BC The whole gang, 10 people, 6 rigs

Skifari 2018 is in the books, it was a GREAT trip this year.* Amazing snow all week! Did a little write up here:*https://www.nwadventuretruck.com/skifari-2018-the-ultimate-ski-bum-road-trip/ And picture dump for those who just like pics :D Stuck and hit by an avalanche....* Mt Baker*

Remote switch for the inverter, so I don't have to climb under the bed to run it on every time....

Busy Weekend! Went snowshoeing Saturday. Wife broke trail all day! Started in my messy *** garage making some overhead storage. Hanging from the ceiling And filled up.

Just got home, it's dark, I have to use the truck in two days, do I start this project? Hmmmmm Done! 50 mins drivers side, 20 passenger. Lots of Oregon DOT grit in there still. It's not rusty :D

I think I do well with deadlines..... My wife mentioned that the microwave would be a nice luxury to have. So Microwave it is. Inverter will run it, barely. Pulls ~85 amps, microwave makes odd noises, but it works! So I made a little shelf for it to sit on, drilled small recesses for the feet...

Yeah that would have worked well, if I had not gotten a super deal on this radio... . The mic cable comes off the head, not the body like the Icom. I didn't want it flapping by the rear view all the time. Sent from my SM-G950U using Tapatalk

Also got the Ham radio nearly installed. Just need to finish running power..... Picked up a cheap ft7900 For as big as the truck is, there is no where on the dash to put a damn remote face plate! I settled on this, its low, not going to be adjustable while driving, but should work ok. Also...

Floors are cold, really cold. So before the last trip I bought some cheap carpet and cut it to fit the kitchen/eating area. Had to lift the fridge a bit to clear it. I spray glued foam floating floor backing to it so it doesn't scratch up the vinyl flooring. That way it can be popped out for...

It's on BAT now. Says 3500lb lift and that's about all the details. Sent from my SM-G950U using Tapatalk

Food for thought on the ramps/loading.