Search results

I have a 12ft long 36" deep slide in the living room on the driver side and nothing on the other side. My kitchen sink and counter is on the passenger side so when its closed up there is about 30 inches of clearance to the counter. I like this setup vs. the opposing slide outs as I have lots...

For me the vibration goes away as soon your foot comes off the throttle. Will check the clutch adjustment out though for sure. I did have problems with the airride valve sticking so have replaced it as well. When I had the truck at CIT, they checked all the angles of the drive line and set...

I live near Madison, Wi.... Their they manufacture the FRP panels for Morgan. Not sure of other manufacturing companies closer to you of the material? Price wise is kind of pricey. I was looking for a sheet of 8 foot wide by 28 feet long and I believe it was around $2k. If I were you I might...

A few pictures would definitely help. Might get a few other ideas from it then.

Feels like I haven't made much progress this winter but slow and steady I guess! Here are some pictures of painting the slide out and interior work. Working on staining all the cabinet doors for the kitchen and bathroom. That has proven to be a much larger task than I originally gave it...

The picture I took is with the air bags dumped so there is more room when running down the road but yes there is a risk there.... More reason to keep good rubber on their! It is also built of .125" stainless steel so should stand up to any debris hitting it, but you are right, any kind of tire...

I would agree with Hot Rod. When building my conversion I had run into the same problem. Every where I wanted to put the toilet ended up over a tire. I finally decided to build a custom tank and put it in between the tires. The only way I would attempt to not put the toiled over the tank...

The diamond blade or steel metal cutoff wheel will cut the steel no problem, but it isn't going to cut the FRP. You will need some kind of wood blade to cut the FRP. I think that sealant would work. I like using 100% silicone.

I plan to do the same with my t2000 to FRP box, however all the cuts I have made through my frp which includes window openings, doors, slideouts, vents etc.... I have done 2 coats of urethane on all the freshly cut wood. If water gets in there it will delaminate and will be ruined. I have cut...

Just guessing, but "opt" is probably short for optional. I would think you have spots on your fuse board that you could wire stuff off of that are controlled by these 3 switches. If you look at the fuse board you will probably see OPT in 3 spots but nothing wired to them.

Also is operational! I still have some tweaking and lots of finish work to do but was very anxious to get the unit working. Was very proud to see it work last night:)

Slide out #2 is in!! Well I had my son's 6th birthday party over the weekend and knowing I would have lots of helpers around, I made sure to utilize them towards the end of the party by having them help lift this slide out in. Even with the use of my 2 post car lift and sons 4 wheeler, it was...

Who do you use for oil analysis? I am interested in doing that.

Thanks for the info on your fuel tank. That eases my mind a bit:)

Thanks for the info Don. I don't have anything specific in mind for needing pass through storage other than my friends class A has the sliding trays on his and it seems like he can cram lots of stuff on those and still access them.

Hey guys... thanks for the questions. The truck had dual 135 gallon tanks. I average 6.5 mpg or so pulling the trailer so I should have no issues going atleast 600 miles on a tank of fuel. I am thinking that will be sufficient? Your thoughts/experience on that? My thinking for the...

Also removed the driver side fuel tank to make room for my diesel generator and put it in the shop as far as I could for winter.

Living Room Slide out Was able to get the slide out wall cut out. I am sure the structure I made for it is way over kill but what else is new. I used 1.5" x 3" .180" wall boxed steel all the way around the opening and then a piece of 2" x 3" .250" wall steel for the header. The top, bottom...

Truck is sold. Can be deleted Please. Thanks, Steve

https://rockford.craigslist.org/cto/5244820565.html I was going to use this truck as a tow vehicle for our car trailer but switched gears entirely. The truck has air brakes, air suspension. Rear tires are all at 80% or better. Fronts are 50%. Brakes have under 5k miles on them. Has CAT 3206...

I am using American Family. I pay $480 for the year. The only problem I am having right now is they are only insuring it for the value of the tractor that it originally was. I am pretty far through my conversion now and would like it insured for more than the tractor but require to have it...

rv surplus stores in Elkhart or White Pigeon.

Thanks for the info... I didn't realize guys were putting that big of a front axle on their conversions!

Wow Gordy, that is a lot of weight on that front axle!!!!! That sounds like it would be way over capacity of it?

The shower and stairs.