Texdan

Time to retract! He put the old one back in and only charged for labor since just spliced the wire. Honest local guy.

By looking at the controller and watching the little led lights after you see a green light (1 for motor 1 and 2 for motor 2) then count...

He removed the set screw from the outside and somehow got the motor out from the inside. I couldn't see how he was able to remove the...

Well here's the good news. Mobile Mechanic came this morning and was able to change the motor But did not help. He then unplugged the...

I can only see about an inch of the motor from the outside. Will try again. Will also try moving slide an inch or 2. Saw where that...

From what I've been reading is that the motor can only be accessed from inside? I tried outside but can only see about an inch when...

And what do you mean by decoupled?

How does a jumper wire work?

That's what has me worried, one side will move in but the other won't so how can they get to that motor? We shall see Tuesday.

Our furnace would try to light initially but eventually would not even do that. Had Mobile Mechanic check it and diagnosis determined...

I am very leery about trying this, I certainly don't want to do any major damage. Possible small potholes moving it to the nearby...

Tried this many times, did not work. Thanks for the suggestion.

Already tried this. The slide is already fully extended. I tried pushing in the slide with no success. This is the bedroom slide that...

Well, here's my recent issue. We had packed up and brought in the 2 big slides on our 2020 Reflection GD29RS but when trying to close...

Spoke with Grand Design and they are saying it's most likely a motherboard. Mobil mechanic coming tomorrow to check it out.