huntr70's latest activity

Your furnace fan will only run when the furnace is actually being used. It won't run on fan only. If you're concerned about the...

Are you using a 90 or 45 degree angle to connect, or straight from the hose onto the connection? Have you checked the condition of the...

It really shouldn't be an issue to change out. It will need a new thermostat, but that is about it. The OP may want to consider the...

Yes, the initial recall was thought to be due to overtightening at the factory. Part of the first recall was to inspect for cracks...

Well, I can't help with that specific model since it isn't made anymore, but, the Influence version has the hole right next to the...

No class action lawsuits. All manufacturer's have the 90 day clause in their warranty. It surely is a maintenance item. They can fail...

We picked up our 2023 Momentum 397 this week from the GD Customer Service Center in Elkhart, IN. Our original concern was some...

Replacing is pretty easy. Take all the screws out from around the inside trim ring, pry around the outside flange to loosen it, then...

Your kitchen slide has the same system. The hole for the crank will be on the door side. Always opposite of the slide you want to open.

The 2920 is a fairly new model. There are owners out there....

Assuming you rescanned when setting it up, there is probably a loose connecter somewhere. Start with what you can see behind the TV.

Along with Norcold and Dometic. (and several other brands) Oh, and I'm sure know that Furrion was bought out by Lippert, and 90% of the...

Imagines do not have dedicated heat pads on the tanks. Running your LP furnace should suffice for what you need. If it is going to be...

Because 99% of the industry is using them as the fridge manufacturer's have stopped making the LP variety. (or will stop all production...

It's going to be one expensive rig! We saw the prepped chassis at the RV Dealer Open House in September....it is lifted, and very...