view of the right side of the rear bracket, which mounts to the first floor joist. This bracket angle had to be trimmed o fit between the joist and t
Installed AC Receptacle on new 15A Circuit from the PDP for the Central Vac. Looped out of the box, and ran romex for an AC receptacle in the front b
The 110V receptacle wiring, TV Cable, and 12V DC wiring for the compartment light were relocated from the position shown to the left against the wall.
view of the right side of the rear bracket, which mounts to the first floor joist. This bracket angle had to be trimmed o fit between the joist and t
View of the left side of the rear bracket, which mounts to the 1X2 channel that supports the floor above.
This shows the pre-existing cross piece used to attach the wall. I used it for the front support for the Vacuum, and bolted the Vacuum in place. A 1
Final product with regards to the vacuum unit itself.
Vacuum Hose Inlet mounted on the left side of the second step. This allows the 30' hose to reach all areas of the RV.
RodeoGeorge

view of the right side of the rear bracket, which mounts to the first floor joist. This bracket angle had to be trimmed o fit between the joist and t

There are no comments to display.

Media information

Category
Forest River Albums
Album
Central Vacuum Installation
Added by
RodeoGeorge
Date added
View count
13
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top