I know this isn't the cleanest looking hole. I'm quite the amateur on DIY projects and wood work. The meter is flush mounted to the wall.
STEP 1: AFTER disconnecting the batteries, install the shunt. This should be as close to the batteries as possible. I've seen some install the shun
Volts, Amps in use & % of full (amp hours) are the three basic metrics you receive. I prefer the amp hours % of full. You can have the full voltage
When installing the meter you should choose a location that is easy to access. They recommend you choose a spot somewhere in your living room area.
I know this isn't the cleanest looking hole. I'm quite the amateur on DIY projects and wood work. The meter is flush mounted to the wall.
This is a completed wiring install. The connector on the left runs a single negative 2 AWG wire to the negative post of the battery bank, the post on
Big Sky-JAY

I know this isn't the cleanest looking hole. I'm quite the amateur on DIY projects and wood work. The meter is flush mounted to the wall.

There are no comments to display.

Media information

Album
Tri-Metric 2025-RV installation
Added by
Big Sky-JAY
Date added
View count
1
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top