These are my battery monitor on top and my inverter/charger remote on the bottom. I decided to locate these in the wall of my entertainment center, t

These are my battery monitor on top and my inverter/charger remote on the bottom. I decided to locate these in the wall of my entertainment center, t

  • 0
  • 0
This is the 400 amp in-line fuse without the cover on it. Notice all of my positive connections that used to be on battery post are now located on th

This is the 400 amp in-line fuse without the cover on it. Notice all of my positive connections that used to be on battery post are now located on th

  • 0
  • 0
This is simply a close up of all of the wires. I have romex coming in, twist tied to the romex that is connected to my shore power cord. Romex going

This is simply a close up of all of the wires. I have romex coming in, twist tied to the romex that is connected to my shore power cord. Romex going

  • 0
  • 0
This is the completed project. Using 4/0 AWG wire I have the inverter connected to a 400 amp in-line fuse on the positive side and 500 amp shunt on t

This is the completed project. Using 4/0 AWG wire I have the inverter connected to a 400 amp in-line fuse on the positive side and 500 amp shunt on t

  • 0
  • 0
This was it for day one. All of the AC wiring has been completed from shore power, to and from the IOTA load center and the proper mounting of the ME

This was it for day one. All of the AC wiring has been completed from shore power, to and from the IOTA load center and the proper mounting of the ME

  • 0
  • 0
Just another picture of the completed AC wiring OUT/IN romex. The most time consumption is pulling the wire from A to Z and cutting the correct lengt

Just another picture of the completed AC wiring OUT/IN romex. The most time consumption is pulling the wire from A to Z and cutting the correct lengt

  • 0
  • 0
The ME installation guide makes it pretty easy to follow how to hook up the connections. The challenge for a novice, with no electrical experience is

The ME installation guide makes it pretty easy to follow how to hook up the connections. The challenge for a novice, with no electrical experience is

  • 0
  • 0
This is what I would refer to as the North wall. The wall separating your batteries/propane from the interior of the trailer. This cargo area in our

This is what I would refer to as the North wall. The wall separating your batteries/propane from the interior of the trailer. This cargo area in our

  • 0
  • 0
Another shot of my twist ties. The wiring is pretty simple. Going forward, the IOTA converter is no longer operational. Whenever I go to sell this

Another shot of my twist ties. The wiring is pretty simple. Going forward, the IOTA converter is no longer operational. Whenever I go to sell this

  • 0
  • 0
First I've got to give credit to WIBADGER. He posted a very nice and easy, step by step picture procedure on how to remove the IOTA cover, picture fr

First I've got to give credit to WIBADGER. He posted a very nice and easy, step by step picture procedure on how to remove the IOTA cover, picture fr

  • 0
  • 0
If you remove the undercarriage service cover on my 26 BHS near the entrance of the TT, you'll have access to the slide motor. This also gives you a

If you remove the undercarriage service cover on my 26 BHS near the entrance of the TT, you'll have access to the slide motor. This also gives you a

  • 0
  • 0
Point of no return, cutting my shore power from it's entry point into the IOTA. I could have removed the stock romex from the load center altogether,

Point of no return, cutting my shore power from it's entry point into the IOTA. I could have removed the stock romex from the load center altogether,

  • 0
  • 0
Big Sky-JAY

Replacing my IOTA ILC-3045 with Magnum Energy MSH-3012M Hybrid

I kept my IOTA in place, just by-passed the converter, and began using the Magnum Energy (ME) unit to charge my batteries and power my DC circuit. The ME is not only a much more advanced charging system, and it not only replaced my Xantrex 1000 Watt Inverter with a 3000 Watt, it uses a special Hybrid technology. If anyone has had the generator on to use the A/C cooling and then had it brown out or blow a circuit due to over draw when the compressor kicks in and someone is watching TV or god forbid using the microwave & have the A/C on at the same time. The Hybrid technology supplements power from the batteries to aid the generator when it's overdrawn.
Click to expand...
There are no comments to display.

Album information

Album owner
Big Sky-JAY
Date created
Item count
12
View count
1
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

Big Sky-JAY

Big Sky-JAY

Media items
103
Albums
12
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top