I Actually found out that there is a pump that the lines on the top of the tank go to, when the truck idles this pump will equalize the fuel in the tanks with in 10% of of each, i took the truck to the station put more in one tank and took a ride for a bit and then let it run for 15 minutes after i got back, both tanks were about the same (had allot more in the pass side) im going to just run a bulkhead style fitting like they use in Fuel cell's for a race car on the top back of the tank, running a tube inside the feed to about 12" off the bottom on the drivers tank for both the feed and return.
i would ask more about using one tank but im guessing running the lines direct from the output of the tank and bypassing the pump would do it, just not sure about the flow.
|