Truck Conversion & Toterhome Community - View Single Post - Need Suggestions: Pass Thru Inverter withOUT charger

bushpilot · 09-23-2014, 03:48 PM

several folks (on another site) suggested using the Xantrex ProWatt SW inline transfer relay, which could be used with any (simple) inverter.

Kinda answering my own question here...but it might be helpful for someone else too....

After reading the manual I see that the ProSine 2.0 has an included wired remote/panel (which can be mounted on the inverter or the wall) that does permit the disabling of the charger....its a bit more than i wanted to spend (and the reviews of it are fairly consistent/bad).

Ive also just learned (from reading the manual) that the Xantrex PRO XM (1000 or 1800) also provides "pass thru" when on shore power (and does not include a charger function).

09-23-2014, 03:48 PM	#2
bushpilot Senior Member Join Date: Jul 2011 Location: Tomball Posts: 1,414	several folks (on another site) suggested using the Xantrex ProWatt SW inline transfer relay, which could be used with any (simple) inverter. Kinda answering my own question here...but it might be helpful for someone else too.... After reading the manual I see that the ProSine 2.0 has an included wired remote/panel (which can be mounted on the inverter or the wall) that does permit the disabling of the charger....its a bit more than i wanted to spend (and the reviews of it are fairly consistent/bad). Ive also just learned (from reading the manual) that the Xantrex PRO XM (1000 or 1800) also provides "pass thru" when on shore power (and does not include a charger function). __________________ Don R. '04 Haulmark (M42386) 42', 2 slide, 10kw - Pictures '04 F350 CrewCab Longbed 4x4, 50g aux tank & gear vendors dbl over