more trim work
I finished the entry steps and the aluminum trim. I used the same rubber coin material that I used for the cab floor. I glued flat sheets to the plywood steps and then used a black caulking in the joints. I like the look but the black shows any dust. I also installed the trim around the entry door. I had the window maker bend a clamp ring to fit the door opening. I used my plasma arch to cut off one flange and leave what looks like a piece of black angle iron. Next I sanded the rough edge and put some rubber fender trim over the edge. I used # 8 black sheet metal screws to hold it to the plywood. A lot of work and $$$ but it looks finished.
|