[Kenn]

Today I mounted the water pump and a small cooling fan. The first picture shows the fan mounted to the back wall of a compartment. Below the fan are four 7/8" holes to let the air out of the pump box and back into the compartment. The next picture is of a cover to protect the fan from being damaged while driving. I used a small stainless steel dish and punched about forty 1/4" holes around the edge to let air into the pump. Below I used a round fog light grill to cover the return air holes. I tested it and it moves enough air to keep the pump cool (I think). The third picture is of the pump mounted on the back side of the compartment. You can see the fan hole above the pump and the four return air holes below. The last picture is of the box I covered the pump with. I used putty tape to seal it to the compartment. The inlet is on the left with a small screen/filter and the discharge is on the right.