tank is taking shape
I have been working on the inlets and the outlet for the holding tank. I used stainless thread anchors on the floor of the tank to recieve the 1/4 20 bolts that hold the dump valve to the underside. I used epoxy (thickend) and several layers of cloth on the inside. I will use a good marine sealant on the outside. I made fiberglass flanges to mount the rubber grommets that will hold the abs drains. Today I epoxied the baffel in the center. I will use cloth on the glue joints and then be set to glue the top and bottom on. This has been a big time eating part to build. On the good side it will hold 80 gal.
|