I had the same problem loading my sprint car. The "poor boy fix" was to slide under the truck,remove the 1/4 inch bolt from the back rearend that attaches the ride height rod to the control valve.Push up on the rod and the airbags wood raise the rear of the truck about 8 inches.Car went in the trailer just fine after that. Just need to be careful not to over extend the airbags. Most trucks have the ride height control valve mounted on the crossmember at the rear of the frame. If the truck doesn't have anything covering the rear crossmember you can do it from the top.Only takes about a minute.Just don't forget to reinstall the bolt before you leave!
MMM
|