Quote:
Originally posted by Radman:
Can you tell me where you got the cylinder with part numbers and the like? I would like to learn more about how you solved this issues...
Diagrams or pictures would be great
|
I pieced together a setup using parts from
McMaster Carr.
These are the parts I used:
1 6464K16 PNEUMATIC CONTROL VALVE, FLIP TOGGLE, 3-WAY, 2-POS, MANUAL RETURN, 1/8" NPT
2 2639T7 PTFE SLEEVE BEARING, FOR 1/4" SHAFT DIA, 3/8" OD, 1/2" LENGTH
3 2639T15 PTFE SLEEVE BEARING, FOR 3/8" SHAFT DIA, 5/8" OD, 3/4" LENGTH
4 51915K11 BRASS D.O.T. INSTANT TUBE FITTING, MALE STRAIGHT ADAPTER FOR 1/4" TUBE OD, 1/8" NPTF
5 51915K31 BRASS D.O.T. INSTANT TUBE FITTING, 90 DEG SWVL ELBOW,TUBE X MALE,1/4"TUBE OD,1/8"NPTF quan:2
6 5097T689 D.O.T. CHOOSE-A-COLOR NYLON TUBING FOR AIR, NONREINFORCED,.170"ID,1/4"OD,.040"WALL,SILVER,25'L
7 6498K526 STAINLESS STEEL AIR CYLINDER, SPRING-RETURN, PIVOT-MOUNT, 3/4" BORE, 4" STROKE
8 1064K771 LIGHTWEIGHT NYLON BALL JOINT ROD END, 5/8"-18 RH FEMALE SHANK, 382 POUND LOAD CAPACITY
9 1064K721 LIGHTWEIGHT NYLON BALL JOINT ROD END, 1/4"-28 RH FEMALE SHANK, 90 POUND LOAD CAPACITY
10 91264A240 ALLOY STEEL SELF-LOCKING STANDARD SHLDR SCREW, 1/4" SHLDR DIA, 3/8"L SHLDR, 10-24 THRD, W/PELLET T
11 91264A245 ALLOY STEEL SELF-LOCKING STANDARD SHLDR SCREW, 1/4" SHLDR DIA, 3/4"L SHLDR, 10-24 THRD, W/PELLET T
Parts totaled about $100. The Bill of Materials noted above will have to be modified based on the diameter of the fixed stud on your axle and the air valve on the frame.
I mounted the switch under the dash and get about 3" of additional clearance when the system is activated.
I'll post a picture if I can get a decent angle the next time I'm crawling around under the rig.