....hell yes! go for it!.....even I can't come that close. [he doesn't know the value of his own labor]-grab up on that deal!....BUT hold the cash for the end of the job-just in case he tries to "up" you some. Of Course, you will get it written out....it should include the outside aluminum- .060- with a insulator between the steel and aluminum and stainless screws-not galvanized...corners are to be glued on with a mastic of your choice-before being screwed on- also a 30ga. a one piece aluminum roof-again glued on to 16" centers-with an insulator between the steel and roofing......walls,ceiling and floor need to be 16" on center....I'd specify the 23/32 Ameri-tec flooring with the 50 year warranty. Have the underside of the flooring primed with a cost of truck bed coating also-so all you have to do is spray the seams from the underside-quick and easy that way....make sure all the steel is painted-brushed with a primer and a top coat of Rust-o-leum....after cleaning with a solvent....and all the welds chipped/wire brushed and painted....now, your are talking a deal!....geofkaye
|