dropping the front axle is a shop required change because of drive line angles and the new drive shaft...other than that have at it...nothing else is critical except your welding beads/joints and bolts.....sounds like you have thought it out well....the only issue to me is the ATV at an angle as the seals will begin to leak[maybe]....but if it is not an issue to you-i really can't see any other problems....remember to drain you fuel tanks down so they won't slosh out when the weather gets warm....and keep a watch on seals.....battery issue may be a problem with acid slopping...maybe you will have to drop it to the deck in a separate box...safety first! ......have at it and send a pix of you can......geofkaye and the Rivercity Girlz....
|